NEW-ERA STEEL TUBE TECHNOLOGY CO.,LTD
NEW-ERA STEEL TUBE HOLDING NINGBO PIPEWAY TRADE CO.,LTD
Add to Cart
CDS Cold Drawn Seamless Mechanical Tubing ASTM A519
Material:1010, 1020,1026,1045, 4130, 4140
Size Range: OD: 6-152.4mm, WT: 1-15mm, Length: 5.8m/6m, maximal 11.8m
Delivery Condition: CW, SR, A, N
Application: For mechanical application
Seamless Mechanical Tubing ASTM A519, is one of our most advantage of tubing. We strictly producing according to Standard ASTM A519 requirements. we control accurate OD size tolerance, superior concentricity and a high degree of uniformity in wall thickness. We also accept customer's higher strength or toughness requirements for specific application.
100% Eddy Current Testing.
100% Size Tolerance Checking.
100% Tube surface checking to avoid surface defects.
| Product Name | ASTM A519 CDS Cold Drawn Seamless Mechanical Tubing |
| Material | 1010, 1020, 1026, 1045, 4130, 4140 |
| Delivery Condition | HR, CW, SR, A, N |
| Standard | ASTM A519 |
| Application | Mechanical usage |
| Certificate | TS16949, ISO 9001 |
| HS code | 7304319000 |
| Delivery Time | 45 days |
| Keywords | Seamless Mechanical Tubing |
| Grade | C | Mn | P ≤ | S ≤ | Si | Cr | Mo |
| 1010 | 0.08--0.13 | 0.30--0.60 | 0.40 | 0.05 | -- | -- | -- |
| 1020 | 0.18--0.23 | 0.30--0.60 | 0.40 | 0.05 | -- | -- | -- |
| 1026 | 0.22--0.28 | 0.60--0.90 | 0.40 | 0.05 | -- | -- | -- |
| 1045 | 0.43--0.50 | 0.60--0.90 | 0.40 | 0.05 | -- | -- | -- |
| 4130 | 0.28--0.33 | 0.40--0.60 | 0.04 | 0.04 | 0.15--0.35 | 0.80--1.10 | 0.15--0.25 |
| 4140 | 0.38--0.43 | 0.75--1.00 | 0.04 | 0.04 | 0.15--0.35 | 0.80--1.10 | 0.15--0.25 |
| Grade | Condition | Tensile Strength (Mpa) | Yield Strength (Mpa) | Elongation (%) | HRB |
| 1020 | HR | 345 | 221 | 25 | 55 |
| CW | 483 | 414 | 5 | 75 | |
| SR | 448 | 345 | 10 | 72 | |
| A | 331 | 193 | 30 | 50 | |
| N | 379 | 234 | 22 | 60 | |
| 4130 | HR | 621 | 483 | 20 | 89 |
| SR | 724 | 586 | 10 | 95 | |
| A | 517 | 379 | 30 | 81 | |
| N | 621 | 414 | 20 | 89 |
Quality Control:
1. Incoming Raw Material Inspection
2. Raw Material Segregation to avoid steel grade mix-up
3. Heating and Hammering End for Cold Drawing
4. Cold Drawing or Cold Rolling, On line inspection
5. Heat Treatment: SR, A, N
6. Straightening/Cutting to specified length/Finished Measuring Inspection
7. Quality Testing in own lab with Tensile Strength, Yield Strength, Elongation, Hardness, Straightness, etc.
8. Packing and Stocking.
Tags: Seamless Mechancal Tubing, ASTM A519 Mechanical Tubing, CDS Steel Tubing, Seamless Steel Tubes, 4130 Steel Tubing, 1026 Seamless Steel Tubes, ASTM A519 Cold Drawn Tubing